- Empty cart.
- Continue Shopping
Water Filled Road Safety Barriers for Traffic Management
- Posted on
Swift Technoplast
- 0
- Categories: Articles
Road construction, highway maintenance, infrastructure development and other projects require temporary traffic management to control regular traffic. Work zones, detours, lane closures and activities along the side of the road can create dangers for drivers, people walking and the workers themselves.
A practical way to create defined safety zones is by using water filled road safety barriers. You can position these barriers where required and fill them with water or sand to provide weight and stability.
Active voice:
The Swift 2 Mtr Road Safety Barricade provides a practical solution for road and highway applications. Manufactured using roto-moulding technology, this water filled barrier has a length of 2000 mm, width of 550 mm and height of 1000 mm. It is available in red and yellow for visibility in traffic management environments.
What Are Water Filled Road Safety Barriers?
Workers can position water filled road safety barriers at the required location and fill them with water or sand for temporary safety applications. The additional weight helps improve stability and supports the creation of controlled safety zones.
Unlike permanently installed barriers, workers can easily transport water filled barriers to the project site, position them as needed, and fill them with water or sand for greater stability.
Workers can use the Swift 2 Mtr Road Safety Barricade to hold water and sand, making it a practical option for temporary traffic management on roads and highways.
Why Are Water Filled Barriers Ideal for Temporary Traffic Management?
Safety teams must set up equipment quickly and adjust it as site conditions change during temporary traffic management. Road builders and maintenance teams often create traffic routes, close temporary lanes, change routes, and designate restricted areas.
Water filled barriers provide a practical solution because workers can place them in the right location before filling them with water. Once filled, the additional weight provides increased stability for the intended application.
Key reasons to consider water filled road safety barriers include the following:
- Easy positioning at temporary work zones
- Water or sand filling for additional stability
- High visibility for traffic management
- Suitable for road and highway applications
- Useful for temporary traffic diversions
- Practical for construction and maintenance projects
- Roto-moulded construction
- Available in highly visible Red and Yellow colors
Applications of Water Filled Road Safety Barriers
The Swift 2 Mtr Road Safety Barricade supports a wide range of temporary traffic management and infrastructure applications.
Road Construction
During road construction, workers can use barriers to define work areas and separate them from surrounding traffic.
Highway Maintenance
Highway maintenance projects may require temporary restrictions and traffic diversions. Workers can use water filled barriers to create visible boundaries around work zones.
Lane Diversions
When traffic needs redirection around an active work area, workers can use barriers to create a clear and identifiable route.
Road Works
For repair, resurfacing, utility work, and other road-related activities, temporary barriers can help identify restricted sections.
Hazard Areas
Where temporary hazards exist near traffic routes, barriers can help create a visible boundary between the hazard and road users.
Infrastructure Projects
Large infrastructure projects often require temporary traffic management arrangements throughout different stages of construction.
About Swift 2 Mtr Road Safety Barricade
Swift manufactures the 2 Mtr Road Safety Barricade SIP-RSB-205510(D) as a water filled road safety barrier for roads and highways.
A machine uses rotational moulding technology to shape the barricade. The barricade holds water or sand, which adds weight and improves stability. This makes it really useful for controlling traffic when you need to move barriers because the project is changing. The water or sand inside the thing helps keep it from moving, so it is great for temporary traffic control.
The Swift 2 Mtr Road Safety Barricade measures 2000 mm in length, 550 mm in width, and 1000 mm in height. Available in Red and Yellow, it offers excellent visibility and helps improve safety and traffic control in road work and diversion areas.
Product Specifications
Swift designed the 2 Mtr Road Safety Barricade with dimensions suitable for road and highway applications. With a 2000 mm length, each unit provides a substantial barrier section for creating temporary safety boundaries. The 550 mm width and 1000 mm height provide a clearly visible physical presence around work zones.
The rotomoulded construction and water- or sand-fillable design make the barricade suitable for temporary traffic management applications that require additional stability.
Product Specifications Table
| Specification | Details |
| Product Name | 2 Mtr Road Safety Barricade |
| Product Code | SIP-RSB-205510(D) |
| Product Type | Road Safety Barricades |
| Make Type | Roto-Molded |
| Overall Length | 2000 mm |
| Overall Width | 550 mm |
| Overall Height | 1000 mm |
| Barrier Type | Water Filled Barrier |
| Filling Options | Water / Sand |
| Available Colors | Red & Yellow |
| Primary Applications | Roads and Highways |
Key Benefits of Water Filled Road Safety Barriers
Water and Sand Fillable
The Swift barrier is designed to hold either water or sand. This allows the user to add weight at the installation location according to the requirements of the application.
Additional Stability
Filling the barrier adds weight, helping provide increased stability compared with an empty barrier.
High Visibility
The Red and Yellow color options make the barricade clearly visible around road work zones and traffic management areas.
2 Metre Barrier Length
With an overall length of 2000 mm, the barricade provides substantial coverage for temporary safety arrangements.
Roto-Moulded Construction
The product is manufactured using roto-moulding technology, making it suitable for road safety applications.
Suitable for Temporary Applications
The barrier supports temporary traffic management requirements, allowing workers to establish or change safety boundaries as project work progresses.
Practical for Roads and Highways
The product is designed for roads and highways, making it suitable for infrastructure development and traffic management projects.
How Water Filled Road Barriers Work
The basic deployment process is straightforward:
Position → Fill → Stabilize → Manage Traffic
First, workers transport and position the empty barrier at the required location. Once they place it correctly, they fill it with water or sand. The added weight provides additional stability for the intended application.
When project requirements change, workers can empty the barrier and reposition it as needed.
This makes water-filled barriers particularly useful for temporary projects where traffic arrangements can change during different stages of work.
Water Filled Barriers for Construction Site Safety
Construction sites near active roads require clear separation between work areas and surrounding traffic. A highly visible road safety barrier can help communicate where vehicles and pedestrians should not enter.
Workers can use the Swift 2 Mtr Road Safety Barricade around construction and roadwork areas to establish temporary safety boundaries.
Its Red and Yellow color options also help create a visible safety presence around work zones.
Water Filled Barriers for Highway Traffic Management
Highway projects can involve lane closures, maintenance activities, diversions, and temporary restrictions. These conditions require road safety equipment that workers can deploy according to changing project requirements.
A water filled road safety barrier can provide a practical temporary solution by combining a visible barrier structure with additional weight after filling.
The Swift 2 Mtr Road Safety Barricade supports road and highway applications, making it suitable for temporary traffic management arrangements.
How to Choose the Right Temporary Road Safety Barrier
When selecting a road safety barrier for a temporary project, consider:
1. Application
Determine whether workers will use the barrier for highway maintenance, construction, road works, traffic diversion, or another application.
2. Barrier Dimensions
Check the length, width, and height required for the project layout. The Swift model has dimensions of 2000 mm × 550 mm × 1000 mm.
3. Stability Requirements
Consider whether the application requires additional weight. A water or sand fillable design can provide additional stability when filled appropriately.
4. Visibility
Select a barrier with a clearly visible colour suitable for the traffic environment. The Swift barricade is available in Red and Yellow.
5. Handling Requirements
Workers should consider how they will transport, position, fill, empty, and reposition the barriers throughout the project.
Comparison Table
| Feature | Basic Temporary Barrier | Swift Water Filled Road Safety Barrier |
| Barrier Type | Basic Barrier | Water Filled Barrier |
| Manufacturing | Standard | Roto-Moulded |
| Filling Option | Not Applicable | Water / Sand |
| Length | Varies | 2000 mm |
| Width | Varies | 550 mm |
| Height | Varies | 1000 mm |
| Stability | Basic | Additional Weight When Filled |
| Visibility | Depends on Model | Red & Yellow |
| Road Application | General | Roads & Highways |
| Temporary Traffic Management | Suitable | Designed for This Application |
Frequently Asked Questions
What is a water filled road safety barrier?
Workers can use a water filled road safety barrier as a temporary barrier that holds water or sand. Filling the barrier adds weight and provides additional stability for the intended traffic management application.
What is the Swift 2 Mtr Road Safety Barricade used for?
The product supports roads, highways, construction sites, road works, traffic management, and other temporary safety applications.
Can the Swift barricade be filled with sand?
Yes. The product holds water and sand.
What are the dimensions of the Swift 2 Mtr Road Safety Barricade?
The overall dimensions are 2000 mm length × 550 mm width × 1000 mm height.
What is the product code?
The product code is SIP-RSB-205510(D).
What manufacturing process is used?
Swift manufactures the barricade using roto-moulding technology.
What colors are available?
The Swift 2 Mtr Road Safety Barricade is available in Red and Yellow.
Where can water filled road safety barriers be used?
Workers can use these barriers for road construction, highway maintenance, traffic diversions, road works, hazard areas, and other temporary traffic management applications.
Looking for a Reliable Water Filled Road Safety Barrier?
Workers can use the Swift 2 Mtr Road Safety Barricade for temporary traffic management on roads, highways, construction sites, and infrastructure projects.
With its 2000 mm length, 550 mm width, 1000 mm height, roto-moulded construction, water and sand fillable design, and Red and Yellow color options, it provides a practical solution for creating visible temporary safety zones.
Contact Swift Technoplast today to enquire about the 2 Mtr Road Safety Barricade and explore suitable road safety products for your traffic management project.
Conclusion
Water filled road safety barriers are a practical option for temporary traffic management because they combine visibility, flexible deployment, and additional stability when filled with water or sand.
Swift designed the 2 Mtr Road Safety Barricade for use on roads and highways. It is very good for safety.
Workers can use the Swift 2 Mtr Road Safety Barricade to improve safety and traffic control during road construction, repairs, diversions, and other work zones. It helps clearly separate unsafe areas from moving traffic, creating a safer and more organised space for workers and road users.
